Umarex SA10 CO2 Pistol Kit

UMAREX IS A WILL DESIGNED WILL BUILT PRODUCT RECOMMEND TO ANY ONE

NOTHING

PYRAMID AIR IS RIGHT ON TARGET NO PUN INTENDED WITH THEIR PRICES AND YOUR ITEMS GET HERE QUICKLY

Gun feels good in the hand, high quality molding and plastic used for the frame. Very good accuracy for a sub-$100 CO2 repeater (nickel sized groups at 10m with 7 grain Meisterkugelns). Strong blowback that actually serves a purpose by cocking the hammer, unlike so many other guns where the GBB is purely for show. Trigger pull is very long and very nearly the same length in both double and single action due to needing to rotate the pellet cylinder, but pleasantly light in single action, and pleasantly smooth in both firing modes. Magazine system allows for easy replacement of bad CO2 seals by just buying a new magazine. Having more than one lets you space out your shooting between multiple CO2 cartridges, which means you can shoot fast without worrying about cold bulbs affecting your point of impact (much).

It would be great if the front sight were taller, to better accommodate use of a moderator and shooting at longer ranges. A highlight for the front sight would also be nice, instead of having it all black. The gun would be well served by an easily adjustable rear sight, or if that's not feasible at this price point, at least a sight dovetail cut for a common type of pistol. I vote for Glock dovetails personally. Would be nice if the gun had a decocking lever. Slide should be able to mount a red dot. Doesn't Umarex already sell a bunch of red dot mount adapter plates for their Walther replicas? Those would be perfect for this.

Barrel threading is the airsoft standard of 14x1mm CCW for some reason, TKO/AGM sells real moderators made specifically for this gun if you don't want a mock one from EBay or wherever. Umarex says to use silicone oil only for the CO2 cartridges for a reason, Pellgun oil will damage the seals of this gun as it is petroleum-based. Field stripping is not covered in the manual and is performed by removing your thread protector or muzzle device, flipping the disassembly lever next to the safety to the down position, pulling the rear of the slide all the way back, then up off the rails and easing it back forward. The recoil spring is not captive and can go flying across the room or otherwise be lost if you aren't careful.

I purchased the Umerex SA10 pellet pistol kit that came with everything you would need to get right to shooting! I get approximately 35 shots per CO2 cartridge with surprising accuracy and power. This is not a toy and could easily be used for pest control. I'm impressed with this pistol and would recommend it

They provide 4, 8- shot cartridges one being entirely plastic which I use for steel BBs I wish that all of the cartridges were for pellets and have the metal rotary center.

Read the directions, care and clean after using and use the correct lubricant for all the moving parts including the CO2 seal for long lasting fun. Make yourself familiar with the cleaning process.

I recently purchased this kit and absolutely love it! After lubrication as directed and firing at a dartboard with a 12 inch by 12 inch foam filled backstop I was pleasantly surprised by the power and accuracy of this pistol. It's not quiet nor is it too loud but seemed just right for what it is. I easily got off 32 shots on a cartridge of CO2 and all shots seemed equal in power, I probably could have shot another 5 or so shots but didn't want to push it on my first time out. This is not a toy and should be used with care for safety however in doing so you will enjoy plinking or even rodent and pest control. I own an air rifle already and am happy to add this pistol to my collection, I'm sure I will try to add more in the near future. Highly recommend this company as they are very helpful and will give you honest feedback and guidance on any topic pertaining to the use and care of their products and even recommendations for whatever you are looking for.

So far the only thing I would ask is that they replace the plastic clip and make them all the same.

I got this on sale as a kit that came with everything you need to start right out of the box.

I liked the price break for this "kit" Everything needed was included. I cannot really provide much else because I have not yet pulled the trigger. Maybe soon.

I'm a newbie owning bb & pellet guns so I have nothing to compare it to.

Great build , excellent accuracy with real blow back action !

have slide lock up on last shot

moderators work well on th SA10

Il love the accuracy, the blowback action is great, all around a great gun.

Instead of the bb mag. Should of came with 4th pellet mag

Nice solid feel. Shoots well and easy magazine load/unload from pistol.

1. The 8-round rotating disc magazines are not available separately. Instead the whole air cylinder holder and magazine holder assembly is sold with 3 disc magazines. 2. Have to wear sound protection for my ears the noise level is so LOUD!! Seems it has been made loud maybe to help train people to shoot regular guns. Same with weight or feel is similar to a regular gun. I would Change this and Offer a Quieter version for "in town" backyard shooting that would not cause close neighbors to call the police.

It is recommended you use Pellgunoil starting with a drop on the air cartridge top where it makes the seal.
If you have not used a CO2 cartridge gun before, you may want to take time to watch YouTube videos or go to a sport or gun shop for a demo/help.

Everything, good left-handed feel, was spot on out of the box and only got better.

Is large... but worth it. The BB magazine not worth it, more magazines.

Opportunity to purchase more magazines.

Great gun. It isn't the most accurate but it shoots well and handles well.

Make the ammo holders more snug on the clip as they fall out when ejecting the clip.