Hawke Match 1" Rings, Low, 3/8" to 11mm Dovetails

Compact low design, theoretical ability to accommodate a wide range of scope groove widths, built-in friction strips to help secure the scope.

The set I got was faulty and had to be returned. The reversible mounting feet had their screw mounting holes drilled off-center. As a result, the "narrow" setting sat at a very canted angle, and the "wide" setting was not possible at all, as the feet could not be reversed. It's surprising that such a simple product could have such a basic quality-control issue.

A good product for the price - IF you get a set that was correctly manufactured. Pyramyd did a great job handling the return and refund.

I liked the construction, finish, and padded tape inside the rings.

The rings would not fit the 3/8" in rails on my Ruger .22 rifle. The product description said to rotate the clamp to fit 9-11mm or 3/8in rails, but the clamp would not fit the 3/8in rails. I believe this is because the ring clamp holes were not drilled in the correct places. I had to use a Dremel to enlarge the holes to allow the clamp to fit.

Very easy to install and I believe very good quality.

The main thing that I really liked about this , product is the double screws and they're very well built and they're strong enough to stand up to even bigger rifles not on just an air gun

Absolutely nothing

I put a set of these on a 243 Savage model 99e and they were perfect no problems no failures absolutely perfect product for light Centerfire rifles very strong product

They fit my Beeman R1 just perfect and they are low light weight and fit my 2-7x33 Leupold just right. The recoil pin keeps the rings and scope solid with no movement at all.

Nothing.

If you use these scope rings with a heavy scope, I don't know how they will hold up but with the light Leupold scope they work great.

Great quality mounts used on sons crosman raven with 3x9cp to get correct scope height

Nothinh

If you need a good low scope mount look no further than hawke

It worked fine on my Daisy 853. I needed to get my scope lower so my rifle fit me better.

Nothing.

If you are using a centerpoint 4x16 (SKU CenterPoint Optics 4-16x40 AO Adventure...)on a Daisy 853, this ring will get the scope fairly low so you can get a good cheek weld.

Well made, grip the scope and receiver very well, I like the adjustable stop pin-you can use it or not, if there are no holes for it in the receiver.

These rings are low. The AO ring on the Hawke 4x just clears the receiver.

Available in 1" low.

Substitute the top ring cover, for one with picatinny. Clearly indicate torque specs.

Solid, well built set of rings.

N/A

Nice set of 1" rings with low rise.