Page 3 - Springfield Armory M1 Carbine Reviews

Nice weight and balance. Accuracy was very good for a smoothbore! Repro slings and oilers for real one fit. Got about 52 shots per fill of 12g Co2 capsule. Faux wood stock looks great!

The wood stock shouldn't cost $100 more.

Make sure you put a drop of Pellgun Oil on the tip of every Co2 capsule to keep seals lubed!

WOW!! Excellent replica. Well made. Looks & feels great! Kept the box too.

Nothing. I added the mag pouch and OD green sling. Looks cool.

Good products & service. Fast shipping. Highly recommend. Thanks.

like the way the gun handles, easy to get sight picture

the magazine follower keeps breaking and has to be replaced. it is made of plastic and does not hold up. I am in the process of returning two for replacement. hopefully, they will get the message and make them stronger

I love this gun. I have a real one, and side by side it is hard to tell the difference until you open the breech or pick up a magazine. I started buying these replicas to hang up in the den. Also, I wanted to mess around with optics and see how I liked them on this before I invested in something for the .30 carbine. I just love shooting it when the magazines work. I have a red dot mounted and the upper hand guard mount is solid. I did remove the fake elevation ramp and installed a real one using the original sight frame and windage adjustment screw. That necessitated filing down the front sight for zeroing. Aided and unaided it shoots well. I only shoot 2 clips out of a CO2 cartridge.

The magazines. I despise the magazines. They are the Achilles heel of this gun. Pyramid Air has sent replacements. I suggest keep sending them back till you get some that work. I wish they would do the design better. They could make a 30 round mag that takes two CO2 cartridges.

I replaced the magazine air valve o rings with o rings from tractor supply. Keep Dust Devils away from this gun. The cartridge piercing seal is contemptuous. PA sells the upper handguard scope mount and it installs tight, but does not come with directions. You need to look at things and think it through before loosing your temper and passing judgement. Once you get the handguard off, there is a barrel band that needs to be removed for the rail to sit flush and screwed down. It fits tight and solid on mine. I think I am going to look for one for the .30 carbine and the mini 14 as well now I have tried this platform on the bb gun. The front sight has a set screw that comes loose requiring loctite.

The action is very smooth its very accurate and nice looking

Add an extra clip

Well worth the money

Poorly made front sight was crooked when received adjusted tightened came loss first shot .stock was loose and magazine was faulty

Needs better workmanship and QC

Thank you for thr prompt handling of my return

I am very impressed with this carbine I received today. I had ordered then returned a synthetic version from another supplier and returned the next day. Then found this wood stock version for almost 50 bucks less. And the quality is so much better. I recommend this model with real wood if you can afford it. Pyramid Air makes more possible. Very happy indeed!

One thing only. Modify after market magazines so they allow the slide to stay open after the last shot.

I really did the research on this piece. And it is worth the money. If you purchase real wood from pyramid.

Is very realistic people think it's a real M1 seems to be very accurate. Great for plinking varmints. I really like it.

Nothing

Fun to shoot you'll really like it.

I purchased the wood stock M1.. I wanted a very authentic looking rifle. The stock is beech wood. Very utilitarian in appearance which what a real M1 carbine is. The picture on the nice box looks a lot better then the rifle you get. But that is the same with everything. When was the last time you got a Big Mac that looked like the picture of it does? I am sure the faux wood stock looks a lot better. I might even purchase one of those next. I will buy a sling, oiler and magazine pouch for it. I have a bayonet for it but have not tried to see if it would fit yet. Is the wood stock worth an extra $100 bucks. I don't think so.. Maybe a $50 upgrade but I wanted an authentic look and feel. Anyway I am glad I bought it and added it to the collection which will be passed on to the kids and grandkids.

The box comes with a spot for an extended mag but no extended mag. Do they make one? Make the carbine able to accept a real bayonet. Maybe pay a bit more attention to the wood they use. I am a cabinet/furniture maker and wood is very important to me in fit and finish. Make the rear sight adjustable for elevation. I mean at the price of the rifle its something they should do. So a true bayonet lug, a bit more attention to the finish of the wood stock and elevation adjustable rear sight and that is about it.. Plus that extended mag if it exists.

All in all, not bad, nice box and presentation. Really give some thought as to dropping the extra money for a wood stock. To me it's a once in a lifetime purchase so I bought it but I would not mind owning the faux wood one either. Get the sling and oiler and pouch for it.. Amazon has them for $30 total.. also a canvas cover for it another $30, a fleece lined one for $34.. Pyramyd Air did a good job with fast shipping and packaging as always.

I love this plinker! Unfortunately I found it's weakness after about 4 Co2 cartridges. You guessed it, the broken magazine follower. Pyramyd took care of me and I got the replacement magazine today. After studying the follower I came to the conclusion that it most likely broke after slipping out of the retaining notch and slamming into the top of the magazine. I hopefully came up with something to prevent that from happening. I used a thin hardwood dowel with a rounded metal finial to push the magazine follower down and easily into the notch. I then made a 1/8" thick and 1" square piece of hardwood with 1/8" notches on the edges to keep the follower from slipping out of its notch.

The dang magazine! I will post some pictures of my improvements when I am allowed to.

I love shooting this airgun. It's much more accurate than I expected. Take it easy on the magazine and hopefully I/ we will be having a blast for a long time!

Just like the real thing.

Put wooden furniture on it rather than plastic. At no additional cost.

No

good construction, well balanced, fun to shoot

real wood stock

enjoyable and fun to use, one of my favorites

Looks

I can’t get through a full magazine without jamming misfiring etc.

Just a wall ornament !!!!

Accuracy, looks, feel.

Extend the warranty and offer repairs and parts for money after 90 days is up

If it breaks after 90 days, you're out of luck, period! I bought this rifle from Midway in late May 2021, then later spent another $100 on the wood stock from PA. After about 120 days, the blowback function ceased to operate, rendering the rifle unusable. Midway referred me to Air Venturi, and they sent back this message: "I apologize, we dont service the rifles after 90 days due to labor cost vs rifle cost, as well as we dont carry any parts at this time. If you would like to attempt some type of work I have included the schematic." So I am left with a $300 wall hanger after only 4 months of operation. I'm extremely disappointed with Midway and Air Venturi for not standing behind their expensive product, even refusing to repair it for money or supply parts. A great gun while it lasted - that's why I'm giving it 2 stars instead of none.

The exact duplicate of my ww2 my carbine. I love it.

I got the wood stock model . Keep this as an option at a lower price.

Do your homework on all the the supplies and cleaning equipment needed for fun shooting.

Looks like the real thing

Nothing

No problems yet

It is almost the same appearance as the M2 Carbine issued to me in Korea in 1952. I like it!

I am satisfied with it just as it is.

It is simple to operate.

I went with the wood version and it really looks great. The blowback action is really good. The carbine has a nice heft and feels a lot like the real M1 Carbine I have in my collection. This one is well done!

It would be better if it was available as the M2! There's nothing like fully auto! Also, a larger 30 round clip would be awesome.

It is fun to shoot. You might want to get more than the included magazine. Not sure why yet but I did experience a few jams where the bb failed to feed for some reason.

Looks good, great price, WAS fun to shoot!

Mags are crappo! Bought an extra, puked at first use. Original lasted about 5 loadings and spring extruded from follower slot.

Pyramid Air was great with a quick answer about faulty mags. Sent me an email address for Air Venturi, the vendors. HOWEVER; Air Venturi suggested that I purchase ANOTHER $35 dollar magazine rather than offering a BETTER MAGAZINE FOLLOWER SPRING. $35 versus a 25 cent spring? Don' think so. NO MORE Air Venturi product in my future?

This item looks exactly like the M-1 carbine. My fellow shooters all agree that if they didn't know it was a BB gun, it would be taken as the real rifle. Accuracy is good. I would like to see a shoulder strap added.

No

No