Carbon Fiber Tank, 4500 psi, 88 cu ft

The bleed valve leaks after only 2 fills, can't shut it off. the little white plastic ball is crap!! $750.00 is a LOT OF MONEY, I can't believe I'm the only one having this problem.. no repair parts?? maybe something better?? HELP!!

the pressure regulator that is on the smaller tank should also be on the large Tank! t The small tank has a lot better bleeder valve. has to bleed out fast so the check valve closes or you loose all your air. Air hose should be longer also.

I Love Air guns, nice and quiet.

The bleed valve leaks after only 2 fills, can't shut it off. the little white plastic ball is crap!! $750.00 is a LOT OF MONEY, I can't believe I'm the only one having this problem.. no repair parts?? maybe something better?? HELP!!

the pressure regulator that is on the smaller tank should also be on the large Tank! t The small tank has a lot better bleeder valve. has to bleed out fast so the check valve closes or you loose all your air. Air hose should be longer also.

Holds a lot of air!!

1) pressure gauge - would be nice to know if it was certified accurate. It's a little disturbing when the gauge on the tank reads just over the 4000psi line but no ware near the 4500psi line but I have the compressor turn off at 4300psi. I need to know which is accurate (tank or compressor gauge). 2) Really needs a holder/carrier!! I've purchased a courier bag from an on-line retailer to try, but I would like a padded wheeled cart for this thing. It's just too awkward at the range.

When charging the tank in your PCP device, do it slow. Only turn the know a bit and watch the gauge. You don't want to bust the tank in your new gun (no I didn't do this but I can see it happening.

This tank is a great item if you have multiple PCP rifles.

A longer fill hose and a base attachment so the bottle stands on its own.

This seems to be a high quality product. Got it charged for $8 at my local SCUBA dealer. The only way to get close to 4500 psi is if you fill your tank on the day your shop fills their banks, otherwise expect to leave with only 4000 psi or even a little less. Still enough pressure for several fills and a lot of shooting.

A rubber boot like the ones SCUBA people install on their tanks so they'll stand upright could be included.

Pyramyd should have anticipated that I needed an extra conversion part when I bought this tank at the same time that I bought an Air Arms S510. No worries though. I figured it out and bought the piece I needed a week later and was up and running as soon as it was delivered.

Fills my sumatra benjamin Maurader fast beats pumping it's pricy but after u get it your into the pcp world

Better quality foster females they feel grity have others that are obviously better quality the baring almost pop out of one it jam and was able to use a knife push back in and it closed however u don't. Need to use that one cause u plug on the manomete and its has a better foster so the one grity one stays on gauge so don't matter if don't leak

It's so much fun now to fill the gun not a chore people at the range always stop and have to ask

The tank is lightweight and any well equipped paint gun shop can fill it just as it comes.

The available carry strap is a necessity and facilitates point A to Point B but it needs something to keep it from rolling about during transport other than packing it in blankets.

While expensive, it is an excellent investment and eliminates the running out of air issue.

After purchasing this tank I would not be without it. After I filled the tank I got 700 shots from my 25 cal Marauder.

Nothing

This tank is a must if you own a PCP

As advertised. Certainly preferable to a pump or other method for refills. Straightforward, easy to use.

A base to set it in would make for easier refilling in the field

I bought this tank along with the Air Arms S510. Excellent!

Nothing

Buy it!