Page 2 - RWS HyperMAX .177, .177 Reviews

Packaging is great. Finish is very clean. Superb avg speed deviation of 12 - 13 fps in my IZH 61 !!! I will use the packaging again and again for sorting other pellets.

Nothing, Price is little high,,,,but you get what you pay for.

I didn't spend much time for zeroing accuracy yet but my guess is it will be excellent

Individual packed, smooth finish, consistent size, shape and weight.

The diameter need to be larger. They fit too loose in both of my high-end rifles.

The HyperMax pellets are not usable in either of my rifles due to poor accuracy. The pellets would not stay within an 8.5x11 sheet of paper at 25 yds. with either one of my rifles (a new Walther Talon Magnum and a Webley Eclipse). It's not my eye or my rifles because with ordinary Beeman Ramjet pellets, the Webley Eclipse shoots a 3/4" 5-shot group and the Walther Talon shoots a 2-1/4" 5-shot group at 25 yds.

These DO have a niche - in handguns, with limited power, these give you a better velocity and penetration.

Lead free

I don't see the purpose for these pellets. Firing at my usual log target in the backyard at 60' and also a wooden plank, I got the worst results of all the pellets I've used. The accuracy was poor (with a scope) in my Crosman 2104X which didn't take the pellet well (I had a hard time returning the bolt to move the pellet into the chamber), penetration was much less than any other pellet, and expansion was nil. One of them even ricocheted back 60' and hit the house.

Because of the ricocheting, I don't know that I'll be using these in the garage firing at a steel trap at 25'. Since penetration and expansion were poor, I don't see how they can claim maximum impact, therefore I would not use them for pest control. Since they're not wadcutters, I wouldn't use them for paper target shooting either. From other reviews I can see that many are very pleased with these pellets but I just don't see what I would use them for.

Clean, good penetration and uniform size and shape.

Quanity per tin.

I prefer the Crosman SSP pellets in my Crosman NPSS, same price with a 250 count.

good shape, uniform

offer a hollow point or wadcutter

shoots ok out of my walther pistol

The lightest Pellet on the market in .177cal. VERY accurate and made consistantly. Even tho they are obviously made from a mold its very difficult to distinguish one from the other (German made).Non-Lead.

Not a DAMN thing!

The pellet holders are a lite weight ceramic or type of styrafoam and you can easily knock them out or loose them. The lid is easy enough to top off and be put in place like a lid on a shoe box.

Everything about these pellets is positive. I have used many kinds of pellets and these are by far, " THE BEST "

Make available more calibers and package quantities.

Get your own !

IMO, it's better than any PBA on the market ! High points : Asthetics, Accuracy, Velocity, Penetration, Expansion, Cleanliness, etc.

Nothing at all

You gotta cop this, I know they're not cheap, but you only live once !

This is the best looking pellet I've ever seen. They look like they were laser cloned. I enjoy just looking at them. (Lol) it's a shame they have to get bent out of shape.. They have awesome accuracy, penetration, and expansion !

NADA THING, other than making them in .22 caliber

If you could afford it, go for it ! You won't regret it ! In my opinion, the best looking pellet ever made !

This is a hard hitting pellet due in part to its increase in velocity and shape retention. I use it in my S & W 686 and it zips through 2 tin cans with authority.

The packaging is not user friendly, if no careful one could easily spill the entire packet contents onto the floor.

Be aware of ricochets as this alloy holds its shape, wear safety glasses always.

Each of these pellets were consistant.No deformity.Velocitywas excellent.Penetration(Targets).And Accuracy.

Price per pack.And a .22 version would be excellent if it is ever produced!

This pellet works excellent in Crosman 1077 repeater.Only 2-3 fell out of rotary magazine when tilted ,out of 100.Once magazine is loaded into clip ,no problem afterward.Tested them out at 25 feet targeted at 1/8 inch wood (Old dresser drawer) went completly through and with clean holes.A few had damaged skirts .Very hard alloy metal.With an extreme point tip this pellet can penetrate alot of targets.And higher velocity/power/accuracy in 1077 than Gamo PBA's tested on same target/distance.A little pricey especially for a repeater but,perfect for shooting with POWER ocasionally.Most powerfull pellet i've tested in the Crosman 1077 so far.

I wanted a lead free pellet for use in the back yard, where my daughter plays and our guinea pigs graze. These fit the bill, and I like them better than other non-lead pellets I've tried. The pellets are impressively uniform. Good surface finish, no irregularities, consistent fit in the chamber from pellet to pellet. The packaging prevents the pellets from contacting each other or anything hard (perhaps a bit excessive!).

I wish they could bring the price down. Is it just a matter of sales volume? Or perhaps the harder (non-lead) alloy wears out dies faster?

These pellets have good accuracy potential at subsonic velocities, e.g. in CO2 pistols. My Crosman 357-6 likes them. In higher powered guns like my Gamo Whisper, they will go supersonic (crack!). This leads to huge groups (maybe 2-3" at 20yd), but interestingly they do not keyhole as I expected them to.

excellent velocity, penetration.

nothing

awesome pellet, well made.

Perfect uniformity in shape, great packaging, no damaged skirts, super accurate from a crosman 1377 indoors at 20 feet. I expect to get more accuracy when the 1399 stock arrives for the 1377 and I will update when I get the Chinese PLA AK-47 practice rifle. And they're lead free so, less cleaning and environmentally friendly!

More finishing or buffing on the pellets. They're made by two-piece construction so there is a seam that seriously effects the trajectory at distances of over 30 feet.

I think anyone with a higher power weapon will benefit greater from these pellets. They also provide great penetration and less deformity on impact because of their blend of metals.