Date: 3/7/2024 10:20
JULY FOURTH SALE: 11% OFF with code FREEDOM SHOP NOW *

*Some exclusions apply.

Page 6 - Leapers Accushot 1-Pc Mount w/1" Reviews

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail

Average Customer Review

Rating 5.05.0 (204 reviews)
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

Sort by:
Filer by:
  • Previous 12 ... 567 ... 1011 Next
  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    This works perfectly and it's very inexpensive.

    What others should know:

    This mount, if properly installed and used will eliminate scope-creep in even the worst case scenarios. Does not fit some compact scopes.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    UTG makes high quality products. Centered perfectly for me. No more movement of scope on springers!

    Things I would have changed:

    Nothing

    What others should know:

    Nothing

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Tightens down nicely without slipping and is the right height

    Things I would have changed:

    Nothing

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Easy to install. I prefer a 4 screw claps to hold a scope in place.. Needed this for a gas ram gun... worked well on a BSA Lightning. Locked everything tight.

    Things I would have changed:

    pretty straight forward

    What others should know:

    You don't want two piece units on a "springer" gun..Trust me. Even on my gas ram BSA it moved a pinch but the locking screw stop it form going a ny further! I needed these high ones for a 50mm scope and even then there was only 1/4 inch space to hitting the barrel..

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Does what it is supposed to do. Impressed it came with tools & extra set screws/ screws.

    Things I would have changed:

    Nothing i can think of....

    What others should know:

    Using this,I bolted a new Hawk optics scope onto a Benjamin Titan NP .177 that I am slowly figuring out....had to trim the scope cap on the objective (40mm) side to clear the receiver. Shaved a mm off the bottom so it would fit. It would not have fit a scope with a 50mm obj. on this rifle.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Rock solid after about 500 rounds with RWS 350 Magnum without the need for loc-tite or re-tightening of screws.

    What others should know:

    This mount does not compensate for barrel droop.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    This is a good and solid mount at an excellent price.

    Things I would have changed:

    nothing

    What others should know:

    You can spend more and not get any better mount

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Its 1 piece. A must for air rifles.

    Things I would have changed:

    Not a thing.

    What others should know:

    Good value and a must.

  • Rating 4.04.0 4.0

    Rating 5.05.0 5.0

    Things I liked:

    Well made and secures scope to rifle.

    Things I would have changed:

    Right now, not a thing.

    What others should know:

    I ordered a similar mount from a competitor, something "Planet", huge mistake. It took 1 month to receive it, and the screw hole stripped the second it was installed. I was very cautious, but it didn't matter. I will only order from PA due to the following facts, they stand behind what they sell, have it in stock, and do not outsource (i.e. drop ship) inventory. In the short and long run I lost money on a crummy mount that I thought would be better. Also, Airgun Scopes are not the same as rifle scopes especially in Magnum Springer's like my Hatsan 125 which killed a NcStar 3-9X40 in just an hour of use. NC replaced it, and we'll see how it holds up in the new mount.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Everything, the perfect air gun scope mount

    Things I would have changed:

    nothing

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Great packaging. That sounds funny but it is nice to be able to open a box instead of deal with shrinked wrapped items. Had extra bolts and came with decent wrenches. I like the use of the stop pin.

    Things I would have changed:

    As much as I like the packaging I actually cut myself on the edge of the plastic box they come in - so be careful when opening. But then you have a nice box to keep your spare parts in so that is good.

    What others should know:

    You can back out the stop pin and control how deep you want it to go down. This is a nice feature over the use of rolled pins that just push in as opposed to Leapers threaded stop pin. Holds tight onto the rail of my TX200. I would but again. The TX has a high comb on the stock and with this mount they eye to scope alignment is perfect. Just lines right up.

  • Rating 4.04.0 4.0

    Rating 5.05.0 5.0

    Things I liked:

    It is one piece. The stop pin.

    Things I would have changed:

    Make the stop pin for either end as needed.

    What others should know:

    Due to the location of the stop pin it can only be mounted one way, and it makes the scope cant(lean- right)to the oposite side from the tighting screws. Like the mount, holds the scope securly.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Fits tightly on my silent cat. The stop pin is great to have.

    Things I would have changed:

    Nothing.

    What others should know:

    Buy it !

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Used with Leapers utg 3x-9x... perfect set up for Patriot .25 cal.

    Things I would have changed:

    nothing

    What others should know:

    Perfect for magnum springers

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    This mount was perfect, not too heavy and very solid

    Things I would have changed:

    Could use a little higher

    What others should know:

    Original gun sights can still show up

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    No complaints! Works perfectly to keep my Hawke Scope anchored to my Weihrauch HW97K.

    Things I would have changed:

    Not a thing! Excellent product!

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Very sturdy and well made. Good value for the money and greatly recommended for those higher power spring piston airguns.

    Things I would have changed:

    Nothing really.

    What others should know:

    If your airguns have heavy recoil this is the ticket.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Really like the 1 piece mount. It was already aligned perfectly. The 4 screws in each ring are superior to 2 in each ring. I also like the 3 screws in the mounting rail.

    Things I would have changed:

    None

    What others should know:

    A real bargain to compliment a Leapers 3-9X50 Mil Dot scope.

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Fit and finish. Simple to use.

    Things I would have changed:

    Nothing1

    What others should know:

    Worth the money!

  • Rating 5.05.0 5.0

    Rating 5.05.0 5.0

    Things I liked:

    Rock solid with no fuss. Has a tight stop pin which locks this puppy up perfectly.

    Things I would have changed:

    Not a thing

    What others should know:

    If you own a magnum air gun of any kind/model/power plant, you will want this mount.

  • Previous 12 ... 567 ... 1011 Next

Buy With Confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Want More?

Join Our Email List for News and Deals!

Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.