Page 7 - Crosman Pellgun oil Reviews

Just a drop is all you need. Lubricates moving parts very well.

The container, make it more controlled to ensure only one drop comes out at a time.

This is not air chamber oil for springer's , if using on a springer be very careful not to get in the air chamber, or it can cause dieseling and lead to seal failure. Keeps my springer cocking easily.

works well

bigger tube

Only use for me is the drop on the CO2 cylinders..does excellent job and is the only I will use for this purpose..

Nothing

Works as advertised.

Nothing.

Never had an issue with Co2 leaks on any Co2 gun I have used this on.

Does what it is supposed to do. Not much else to say about it.

More oil for the money

It works well

sometimes cap leaks

you need this

This is a must have

More for the money

A VERY GOOD LUBRICANT.

MAKE BIGGER TUBES AVAILABLE.

CROSSMAN SAYS NOT TO USE PETROPIUM BASED OILS ON THERE GUNS, HOWEVER THIS OIL IS PETROLIUM BASED. I HAVE USED 3IN1 OIL FOR YEARS ON MY PUMP GUNS WITH NO PROBLEMS, I USE STARRET TOOL AND INSTRUMENT OIL ON MY SPRING PISTON GUNS, IT IS MINERAL BASED. BUT THE PELLGUN OIL IS A FINE PRODUCT, BUT DONT FEEL YOUR RESTRICTED TO IT, OTHER OILS WORK FINE.

The Crosman oil does not have a stink like many gun oils. For those who do not know its contents, it is 20 W engine oil, and has a seal protectant in it. Pellgun oil is really specially formulated. 30W off the store shelf is ok - with no additives and no detergents or you WILL ruin your gun - but is not handy like this Crosmsn tube. My seal on the loading rod of my pump rifle looks great. It turned a rich black from Pellgun oil and stayed that way.

Nothing

The pros say to make sure the seal in a pump gun stays well lubed compared to spring guns (Pellgun oil is not for a spring gun chamber). Pump rifles are oil pigs, and need their links in the pump handle and the pump seal well lubed. The oil preserves the seal and locks in air pressure. Every few hundred shots or once per month - if it looks dry. For example, 20 shots on 6 pumps each equals 120 pumps. The pump action is really putting in work.

This is great for any CO2 gun. All you have to do is put a small amount of the liquid on top of your CO2 cartridge before inserting it into the gun and eventually the formula will work itself into the gun to prevent CO2 leaks.

Nothing.

Do not squeeze the bottle too hard, as the liquid comes out pretty easily and you might just lose half of your product with one squeeze.

I use the Pellgun Oil on all of my CO2 action pistols. It does an excellent job in maintaining the valves and seals

Nothing

Always keep a tube on hand just in case

Good quality oil.

Improve bottle design so it doesn't leak. Would've given 5 stars if bottle didn't leak.

After using for the first time, be sure to store upright or the next time you go to use it you'll be picking up an empty bottle. I know it wasn't an isolated incident of a defective bottle, every bottle of pellgun oil I've ever had through the years have leaked.

Its oil! Its oil recommended by the manufacturer! Its oil recommended by hundreds of users for years and years. Its the same cost at retail stores too!

Larger quantity oil can and applicator like 3-in-1 oil would be nice.

If shipping is an issue, just watch what you are buying it with. Bundle it with something else. I bet if you look hard enough, you'll find something else. For me, it was a no brain needed to add it to a pellet order. It did no increase the shipping cost one cent.

Keep your CO2 cylinder powered guns happy and avoid seal failures with one easy step= put a drop or two of Crosman Pellgun Oil on the sealing surface of each CO2 cylinder right before you insert it into the gun. The best CO2 and multi-pump pneumatic system lube. Period.

A one once bottle with a needle applicator tip would be great. Those time tubes are easy to lose and a bit costly too.

Easy to use/apply. Best pellet gun oil for lubricating moving parts.

Nothing.

Great product. Do not use in the air chamber of spring piston air guns

works well

n/a

A MUST ! DO NOT PUT IN A BREAK BARREL/SPRINGER GUN !! For CO2 weapons ONLY !!

Put a Better warning on Package for BreakBarrel owners!

This is a must have!!! It keeps your gun, barrel, blow back and bbs lubricated! All you have to do is put a drop or two on the very top of your co2 before you outbid in your gun, and do it every time to every change to your co2. It will Deff help will keeping your gun operating great!

This oil will keep your internals on a co2 in good condition for a long time.

Nothing, it works as intended.

Do not use to much, and for new users be carful squeezing the tube as it will come out fast.

This is always good to have on hand, works very well

Nothing