Page 10 - Crosman Pellgun oil Reviews

Pyramyd sells them for less than the local stores here. I put a drop on the tip of each co2 cartage to oil the valves. This size works good for me because it fits in the box I keep the co2 in.

nothing

This oil will keep seals and valves working good.

Everything. . Handy easy tube to use. Low cost and available beside just PA.

Add a small tube for more precise lubing, or make the hole smaller. Clean up is always required .

Yeah, use it or lose it, seals that is. A little lube can add years to your fun and I'm not just talking about airguns.

Everything they do their job and help extend the life of any co2 type air gun.

Nothing"Maybe they could come in a larger size

Make sure you always use them every time your'e out shooting.

Keeps guns well lubricated, always put on tip of CO2 cartridge, seal, and other moving parts.

Nothing

Price better than most and shipping fair when combined with other items.

Make it larger than 1/4 oz.

Nothing

You just can't beat Pellgun oil for CO2 guns. PA has the best price.

can't think of a thing

You really need this if you shoot CO2 to put a drop on the carts each time and or on the face of the bulk fill fittings.

Keeps a better seal on the CO2 cartridge.

Nothing

Buy this when you buy any CO2 BB or pellet gun.

ease of application.

Why change one the best lubes I've run across?

Some manufactures set P. G. Oil w/the product

good lube for proper maintenance

nothing

Excellent lubricant for my needs.Price is very reasonable.

None

easy to store with any co2 powered pistol or rifle,

The screw top doe not seal well. The first tube I used leaked so it might be worth storing in a zip lock bag,

This little tube goes a long way so the price is like nothing for the importance of keeping your airguns shooting a lot longer without having the pain of replacing such an important part of your air system. The little gasket must stay lubed and you will be able to enjoy your air gun without leaking your power..AIR.

nothing

worth every cent. Get it and use it regularly.

seems to work well at this time, ports seem well lubricated.instructions say a drop for every 250 shoots.

not a thing.

works for me.

Handy size to carry around with you.

Lower the price.

Keep a dirty hanker-sheet or a piece of toilet paper with you to wipe the end clean as it tends to drip and accumulate on the end of the bottle.

Red color so I can see that I put it on.

Instead of cutting the end off it would be better if it had a small end that controlled how much came out.

Don't go overboard-just a drop on the end of each Co2 Cartridge is all you need. Also a suggestion would be to prick end with small pin as opposed to cutting end like I did. every time I take off cap it is all over inside of cap and on end.

Nice ruby red oil. If it is necessary for the seals in BB guns so be it!

None that I know of

Keep plenty on hand, especially a drop on top of the C02 cartridge.

Have used it for many years. Helped me keep shooting a Daisy Model 25 Pump Action after 30yers of storage. Also helped me repair Crisman 760 after 30 years of storage. I use t on my rifle and guns after ~250 to 500 shots.

Larget continer would be nice.

Does not damage seals. Great for storing multi pumps with 1 pump of pressure to maintin seal integtiry.

Used for years. Works great. Nozzle fits most holes for oil. Pyramyd air has best price anywhere for it allso. Look and you will see. Use it ever three or 5 big magizine loads.

Put more in bottle. Make bottle bigger.

This oil will not melt down your O rings. Other oils can do that and ruin a very nice air gun. So I would use it at all times. On new High pressure Spring guns I would go with what ever the man. suggests. As this could diesel I think no sure. I use Co2 and HPA tanks stuff, so not good source for info on that.

I was able to revive my old Sheridan 5mm seals with a few drops of the oil. I had not used it for years and was not able to build up pressure until I oiled the seals.

None

great product to keep in your cleaning kit.

Genuine pellgun oil is a must for maintaining your airgun. Put a drop on top of each CO2 cylinder and it will assure a good seal while preserving the seal for longer life.