by Tom Gaylord
Writing as B.B. Pelletier
A Benjamin 310 multi-pump BB gun from 1952.
This report covers:
- Smart Shot
- 4.4mm balls
- 4.45mm balls
- Beeman Perfect Rounds
- Darts and bolts
- Airgun darts
- Bolts
- Airgun bolts
- Bolt extraction
- Not finished yet
Today I will almost complete the velocity test of the Benjamin 310 BB gun. Today we look at the velocity with lead balls and also with both kinds of darts. Lead balls are first.
I don’t plan on testing each lead ball exhaustively. If I find something interesting I can always expand that particular test. And I will exhaust all the air before each shot I record, so you know it is moving that fast on just those pumps.
Smart Shot
H&N Smart Shot measure 0.1725-inches, nominally. Here is their performance.
Pumps……………Velocity
2……………………427
3……………………505
4……………………560
5……………………577
Notice that the amount of the velocity increase diminishes sharply after 4 pumps. If I were to pump the gun a 6th time I would estimate the shot would go out around 490-500 f.p.s.
Let’s try that and see.
Pumps……………Velocity
6……………………556
6……………………562
As you can see, I did not test the gun before my estimate. I didn’t believe the first attempt, so I emptied the gun and tried it again. Without a doubt this BB gun tops out on 5 pumps with Smart Shot. It seems we learned that in Part 4, when 8 pumps shot slower than 5.
4.4mm balls
I tried 4.4mm lead balls next. I bought several tins of these a couple decades ago when the Haenel model 310 rifles were coming out of the former East Germany. These balls measure 0.174-inches, nominally.
Pumps……………Velocity
2……………………430
3……………………496
4……………………549
5……………………569
I will guess that the same will hold true for 6 pumps with these, so I won’t try it.
4.45mm balls
I bought these H&N lead balls to test my Daisy Number 12 model 29 BB gun, but the plunger seal in that gun failed during testing. So now I have them available for other tests. They measure 0.1755-inches in diameter, nominally, so they are the size of the Air Rifle Shot that Daisy created in the early 1900s when they abandoned BB shot. Remember — this is the shot size Benjamin mentions in a lot of their literature, but they also call it steel air rifle shot. As far as I can determine, steel shot was never made in this size.
Pumps……………Velocity
2……………………424
3……………………504
4……………………556
5……………………580
These results are interesting. They show this slightly larger and heavier shot traveling faster than the smaller stuff. I am guessing the reason is this shot seals the bore better. That will be interesting in accuracy testing. Now for the last shot — Beeman Perfect Rounds.
Beeman Perfect Rounds
Beeman Perfect Rounds are supposed to measure 0.177-inches in diameter, nominally, but I measured several and they came out at 0.1765-inches. That makes them both larger than the previous shot and also larger than anything Benjamin recommends for this gun. Let’s see what they do.
Pumps……………Velocity
2……………………453
3……………………507
4……………………551
5……………………580
Wow! The largest shot also goes the fastest!
These shot will be interesting in the accuracy test. I will guess that the larger shot will be more accurate, but we have to test them all to know for sure. Remember the knuckleball? It moves around as it travels through the air because it doesn’t spin. Any one of these balls may do the same.
Darts and bolts
I have two kinds of darts to test — normal Air Venturi airgun darts and special Marksman airgun darts that they call airgun bolts.
I will try them with one pump of air and then add one pump for the next shot and so on. That will tell us where the darts and bolts stabilize, as far as velocity goes.
Since I am concentrating on the chronograph and I want to stop the darts as soon as possible after the last skyscreen, I put a hardwood cutting board in front of the regular backstop. Let’s get started.
Airgun darts
Pumps………Velocity
1………………167
+1……………..214
+1……………..225
+1……………..247
+1……………..203
+1……………..251
We learn a lot from this. First, airgun darts travel much slower than lead balls. That’s good because wait until you see how deep they penetrate.
Next we see that the velocity can vary a lot. Even after they have stabilized they can vary by almost 50 f.p.s. I don’t hold out much hope for their accuracy at anything past about 15 feet.
The darts came out of the gun with a lot of dirty oil on their fletching, so they won’t be pretty long. And they buried so deep in the board that I had to use pliers to extract them.
At three feet the darts went deep into the cutting board. The blue dart in the center was shot number one. And yes, they all landed on an angle to the board.
I got them out with pliers. Because of that they aren’t going to last very long in this gun. Let’s try the bolts next.
Airgun bolts
The bolts were a little long to load, but their flexible plastic tails could be bent to get them into the breech. Let’s look at how they did under the same test conditions.
Airgun bolts
Pumps………Velocity
1………………203
+1……………..228
+1……………..235
+1……………..252
+1……………..256
+1……………..249
Bolts were more stabile in velocity, but they hit the cutting board at odd angles that suggest gross instability in their early flight. That means the accuracy is probably poor.
This is how the bolts hit the board.
Bolt extraction
When I extracted them all 5 had bent tips. This was not from the extraction but from entering the board at high speed.
Every one of the 5 bolts has a bent tip.
That’s it for those 5 bolts. I threw them out because straightening their tips won’t make them fly better. I think these bolts are better suited to lower-powered airguns like the Marksman 1010 pistol.
Not finished yet
Well, this test is epic! The Benjamin 310 is so flexible that it handles more different kinds of ammo than any airgun I have tested — or at least I have tested more ammo in it. And I still have to test some pellets. So — we ain’t done yet!
I’m surprised you didn’t use a softer backstop for the darts and bolts. Something like your DIY rubber mulch shot trap (or really just lots of corrugated cardboard) might help extend the life of those projectiles.
B.B., this is turning out to be a most interesting test…
…most interesting of all with be the accuracy! =>
Very interesting test today.
I have a springer question.
I have a low serial number 1979 Uk made Webley Tempest in .177.
It starts out at 395fps with 7.4gr wadcutters.
After 15-20 shots it stabilizes at 308 fps +/- 4fps.
Is it a seal problem or a Spring issue?
It cocks and fires very smoothly,
And doesn’t leak from the breach seal (toilet paper test.)
Any help or suggestions are most appreciated.
45Bravo,
It’s most likely a breech seal issue. The Webley seal is a complex one. I leave my barrels open when storing the guns to keep from compressing that seal. Keep- it oiled and see what that does.
B.B.
B.B., thank you for that good intel; I’ll start doing that with mine.
That just shows one more of the reasons we all read this page! =>
Thank you I will bow to your expertise.
It passed the toilet paper test for leaks, but seals are cheap, and I don’t know the history of the gun.
Judging by the marks around some of the pins, someone has been into it before.
But I will order a complete set and let you know.
Thanks again!
45Bravo,
There is absolutely nothing you can do for that poor old tired air pistol. The best thing for her would be to send her to RidgeRunner’s Home For Wayward Airguns where she will receive lots of loving care and rest. 😉
Hahaha! I’d like to see a pic of the wayward ones at RRHFWA! =>
Dave,
Here is one of them.
/blog/2016/08/webley-mark-ii-service-part-4-2/
Cool!
Dave,
Here are a couple more.
Nice! Gotta love the ol’ classics! =>
What is really nice about these “ol’ classics” is they shoot as well as what is made “these days”.
By the way, here is the review of the lower one.
/blog/2017/07/millita-breakbarrel-rifle-part-3/
Pretty cool;; I’ll take something like this over a plastic gun any day!
Dave,
They are out there, waiting for someone to take them home and give them a little TLC.
RR I seem to get that advice a lot from the airgun guys, and firearm guys.
There are a few airgunners that I have become aquatinted with over the years that we run a foster child program with.
We some times send a either a problem child or one that is feeling neglected, to each other for a short term evaluation, if they work out in the new environment, they then send me a unwanted one for evaluation.
Some work out and stay long term, some lose interest and move back home, if they aren’t wanted back home then they go to another wayward home.
45Bravo,
I really like your foster care program. I have done that myself in the past. More often than not it ends in an adoption. Maybe I should think about that for one of the girls here. She is feeling terribly neglected, especially since I spend most of my time with the older girls.
As for the Tempest, I would be interested in it because it is an UK Webley. I had one for a time, then foolishly sold it. I would really prefer a Webley from the 20’s – 30’s with the walnut grips to go with my MK2 Service air rifle.
I have wanted a Hurricane and a Tempest since I first say one in 1982 ish. But have never had the chance to pick one up until this one.
So unfortunately for you, it’s found it’s permanent residence.
I also would like a senior, but that’s down the road.
Normally Crosman Mk1&2’s show up on my doorstep I have had as many as 5 at one time.
Each with its own personality.
Recently the S&W 78/79’s have been showing up.
I still love the early Benjamins with the 8 gram co2.
The tempest is my first springer pistol in decades.
Fun plinker, been shooting acorns that have fallen in the paved driveway at 3-10 yards.
45Bravo,
When I was young I had a Webley post war MK1, but it disappeared from my life. Most likely to keep me from getting into trouble with it. Right now I would really like to have a pre war MK1 show up here at RRHFWA to go along with my MK2 Service air rifle. Really, I would be happy with any UK Webley, but that one is my goal.
I guess I really need to see if I can find someone who would like to adopt a couple of my air rifles.
RR, Are you on the gateway to airguns forum?
I am there under the same user name.
45Bravo,
Yes as Ridge Runner.
G’day BB,
We used to use a pig bristle dart board and score as in darts.
Cheers Bob
Bob,
I am hoping to have a bristle board for the dart accuracy test. It’s the right way to go for sure.
B.B.
B.B.,
Thank you for testing the darts and bolts.
I should think the bristle board would hold up best with just one pump based on, in my younger days, using a Benji SSP/MSP pistol(s) and long arm(s) with regulation bristle boards. The big it is flight stability. Your photos of the darts and bolts had me perplexed until the image of the bent bolt tips. Not having seen you pull them out I would guess that most of the leaning was due to the bent tip…that might be solved by the Bristle board.
A good quick dartboard buying FYI: https://www.shotdarts.com/darts-info/dartboard-guide
shootski
BB,
Beautiful gun and nice tests wit hit, thanks.
We use here a slab of lead as backstop for the darts. There is a whole competition with these darts using modified (smooth bored) Diana 66 Match guns. At 10 mtr they are quite accurate. I have one of those guns and I will see whether I can do some tests with it.
I would like to see the bolts at ten yards as I have the impression that the angle which they display at the board is mainly due to the excessive impact. Are they much heavier than the rest?
Regards,
August
August,
As always, you present an entirely different viewpoint. I will weigh the darts now. Three weighed 14.0, 14.4 and 14.5 grains. The bolts weigh 9.1, 9.2 and 9.3 grains.
B.B.
BB,
Thanks for the info. If I compute the foot-pound I get the following:
lead lead steel
Darts Bolts H&N smart 4.4 Haenel balls
speed 203 256 577 569 580
grain 14,3 9,2 7,4 7,4 5,1
foot-pound 1,31 1,34 5,77 5,32 3,81
A bit strange I would expect the bolts to be closer fitting than the darts and therefore faster but it is mainly the difference in weight which explains the speed difference between both.
The slowness of the bolts and darts is not dependent on weight but on the form as the lead balls perform much better than the darts & bolts, but have a weight which is in between steel and bolts.
So it is not the extra energy as the bolts & darts are heavier which makes the bolts deformed on entry but the elongated shape which induces them to fold.
A different backstop and a longer distance may work better for the darts and surely for the bolts. I would give the bolts another chance.
Testing with the Diana 66 has to wait until next week when I get some darts as I have mislaid mine,
Regards,
August
BB,
Sorry tables do not work. A retry:
Darts Bolts H&N 4.4 H steel
speed 203 256 577 569 580
grain 14.3 9.2 7.4 7.4 5.1
ft-pnd 1.31 1.34 5.77 5.32 3.81
Hope this looks OK,
Regards,
August
B.B, this is by far, my favorite AirGun test that you have done here.
Your timing with reviewing this particular Benjamin multi pump air rifle is perfect for me since I have owned a pre-1957 Benjamin 317 for a couple of weeks and your tips have helped inspire me while I get my 317 into shape.
After oiling the pump seals etc, it is shooting 5.4 grain Crosman penetrators a high as 695 fps and the heavier 8.5 grain penetrators hit around 600 fps!!!
I am shooting indoors and my housemates prefer that I use lead-free ammo, and will take it outside soon to see how it shoots lead ammo.
Spinoza,
Sounds like you have a nice 317. I would not shoot lead free pellets in the brass barrel of the 317. I think they are too hard and will wear the barrel. I have not tested my theory, I just think they will wear the barrel much faster than lead pellets. If you do shoot lead free I would lube them.
If someone has been shooting lead free pellets in a brass barrel I would like to hear the long term results. It would probably take a few tins of pellets to wear the barrel.
Don
Hi Don,
The lead free ammo I am using is the sabot style with plastic skirts.
I believe that the plastic skirt is what interacts with the inner barrel/rifling.
It is probably a good idea to clean the barrel more often to avoid plastic residue building up.
The other types of lead free pellets, like Crosman SSP hollow points would probably wear down the rifling like you said.
I will update this comment in a month or two, after I clean the barrel.
-spinoza
Spinoza,
I agree. Keep us informed as you progress.
Thanks
Hi B.B.,
I was somewhat surprised to learn that PCP hand pumps are being sold without a desiccant kit attached, or at least a strong message about what happens to a PCP air gun when using the pump without one. No doubt this is a “caveat emptor” moment.
No doubt, customers would best become educated. However, my understanding of Murphy’s Law isn’t the most quoted, but rather, “if anyone can do it wrong, someone will do it wrong”.
Best to you, amigo,
~ken
Ken,
There is a real question as to the effectiveness of a desiccant filter on the input of a hand pump or compressor for that matter. Does the air linger long enough in the desiccant to have any moisture removed?
At one time one of the British companies, I believe Daystate, would void the warranty if the air rifle was filled by an hand pump.
I have an Hill pump with a desiccant filter. I still get water in the trap.
B.B.,
A very nice set of testing. While I had the 880,… I tried numerous homemade dart-like projectiles. 12″ bamboo BBQ skewers. Same,… cut to various lengths. TIG welding rod. Even tried building the projectiles using arrow building theory,… length, center of gravity, balance, weights, fore and aft ratio, etc. Results did improve as I used it.
In the end,.. it became QUITE obvious if the projectile did not land straight on,… the projectile would bend/break. Basically,.. if off,… the tail end would follow the angle. In other words,… the tail end would try to catch up with the front end after an abrupt stop. Distance to target, fpe of projectile and target material all came into play.
The bolt and dart testing were a very nice diversion. Thank you.
Chris
Chris,
Exactly what I found when I analysed the numbers.
Did you experiment also with darts? And what was the distance at which the darts became stabilized?
After I read this I got some darts and tested them in an old Diana 60 at 10 meter. The Diana (with me, the Diana can do better) shot within 0,5 inch with pellets and around 3 inches for the darts with some entering sideways, so that supports BB’s notion that they are no good for accuracy.
I have to wait until I get the proper darts for my darts enabled smootbored Diana 66. That one uses 5.5 mm darts and I am quite curious as to its performance now. I also will ask around at those shooting clubs which used these modified wapons. You just can have a competition when they fly al over the place like these 4.5 from my Diana 60 did.
Regards,
August.
August,
No,… I did not buy any (proper) darts. Or bolts. I think that they might do quite well in something (very) low powered at short distance. My distance was 24′ and shot into a corrugated cardboard target holder/backer.
It was a lot of fun and I learned a lot about arrow building theory. Perhaps some U.K. sites might be more conducive to dart shooting information?
Chris
Chris
Read You just can NOT have a competition instead of You just can have a competition
Regards,
August
BB – You finally did it – I’ve been reading your blog for 15 years and have bought way too much stuff from Pyramyd AIR, but have never posted until tonight. After your series on the 310, I had to jump in, and I thank you for the motivation!
I bought my Benjamin 312 on Nov 1, 1961 when I was in the 9th grade. I still have the box, instruction sheet/parts list AND the receipt for $20.72, which included a whopping $.36 sales tax(!). I think list price was $25 then. What a wonderful air rifle! It probably took care of 500 grackles in my back yard before I left for college.
Your observations are right on, but I’d like to offer a little more data on the bolt variations: according to my parts list, the 1-piece open-end bolt was used in the 310 AND the 312 since 1952, and also in the 317 from 1951 thru 6-1-55, when it switched to the current pin-style. Before 1951, all were two-piece bolts, but only the 310 had the open ended bolt..
Another point: you mentioned the wobble-free trigger blade. What you said is true about the trigger spring wrapping around the triggers, but the real support comes from the fact that the trigger pin passes thru a bronze bearing that is pressed into the stamped trigger blade (the trigger spring surrounds that bearing, so you can’t see it without disassembling the trigger), providing great lateral stability and preventing the floppiness we see in too many products today. I kind of got away from air guns till about 2003 when I got a (Spanish) Beeman GS1000, and it escalated from there, including a Marauder and a TX200 Mk III.
BB, you are clearly THE authority on air guns with your experience, honesty and insightful ness – plus you keep it interesting – where else are you going to read up on punt guns?
Here’s a shot of my 312
OldAutocrosser,
Welcome to the blog.
Well, you made up for all that time by posting a dynamite comment with a photo to boot!
Thanks for all the information, too!
B.B.