Gamo Squirrel Field Target w/4 Kill-Zone Reducers

Holding up so far. The different sized plates have a few dents/bends, nothin a hammer cant flatten, lol. but they're getting smacked with .25 FX and Hades @30yds from an Avenger.

Make it a little thicker. Make reducing plates thicker. Make spikes longer/double sided.

Not a bad target, even for .25 Avenger. Some people said that the plates might fly off from a hit impact. I wrapped a small rubber band around the back tab and they keep it secure. problem solved.

Sturdy squirrel for target practice.

A but heaver metal

Better shoot straight!

Fairly sturdy. Hook on pop in holes holds them in place pretty well. Only shooting at 20Yds, so I brazed a smaller washer on the smallest hole. Works great.

Add one more hole that is smaller for closer shooting.

Need to bolt it to a heavy base so you can easily pull it back up. Easier to pull up if you set it so it does not fall completely down.

The target makes for entertaining recreational shooting.

very good target! works Ok

Replace the pins with lock nuts & bolts. attach the rings!

over priced! the UMAREX Deer is the same target and is $5 less!

I had used these targets before I purchased two for myself. The specific ones I purchased work fine.

I would wish that Gamo would specify the maximum number of foot pounds to safely use these targets at less than 25 yards. I am a field target shooter and I like to practice in my back yard where I have only 24 yards. As I only have a 12 ft lbs rifle I think I will be able to safely shoot a bit under that. I want this because the shortest distance you shoot at in Field Target competition is 10 yards.

The string that Gamo provides is adequate; however, the connection to the target itself will get destroyed fairly easily. This is not a major worry because the problem is really easy to fix. In fact there are a number of possible solutions and you should be able to do one of them.
Airgun Spymaster

Very sturdy when staked down

Stronger cord for resetting

Good price

Size, cord and cord holder,

I would make the target size reducers attached like some others have. So you can't loose them! Add some touch up colors Yellow & Black. Make them Left & Right

Buy one or two and have at it ! Lot's of fun

Simple design. Fun to shoot. Works as advertised out to 55 yards using my 11.2 foot-pound .177 caliber field target air rifle.

Replace face plate with thicker material like Air Venturi Rat. Reducers need to be bolted to the face place. One bolt and nut though the reducer and face plate is what is needed. Replace hinge pins and friction washers with shoulder bolts and nuts. Many Gamo targets will eventually fall apart when these hinges fail. I have seen brand new Gamo targets fail at field target matches this way. I wish it had 55 yards of string instead of 50.

Reducers are in metric sizes 30mm (1.181"), 20mm (.787"), 13mm (.512") and 10mm (.394").
The KZ is 40mm (1.575").

Size is good and string winder is great.

Use safety nut and bolt to secure connector arms, the pins use a type of spring washer and fall off after some use.