AirForce 1/8" and 1/4" BSPP Refill Adapter Set

Makes filling tanks a breeze

Include the female foster fitting. Understand this is intent Send for a pump. Filling n Air Force tank with anything but a bottle of compressor. Just saying it is not for the fAint of heart. Minimum 300 pumps to make 3000 psi.

Easier than using a subs tank. Just screw this on your tanks. Connect full source and in minutes with a small compressor or seconds with a bottle. Ready to go again.

Well this is one of the things I like about pryamidair, I ordered this part thinking I knew what I was doing. At first look I thought this was a female quick connect that I needed. As it says in the discription this item is not a quick connect. So pyramid has done it job superbly while I on the other hand have performed my part with the I.Q. Of a cold door knob.

Well pyramid has done its part. Keep doing what you have done so very well for so long. I will attempt to step up my game and actually read the discription!

This is not what it looks like, read the description. When ordering anything please read the description. The picture may show a hippo, but the description is talking about what the hippo is standing on.

Well constructed.

Easy to use and a good price.

Nothing.

If you buy a old style Air Force rifle you will need to purchase this item.

Well made. Fit and finish are perfect. great price.

Bought this to connect my Hill pump to my Condor tank and it does exactly that.

well made. fits smoothly.

poor o ring quality

air starts to leak beyond 2000 psi. no matter how much you tighten the 1/8" on the 1/4" thread, the o-ring bulges out from between at high pressure. i had to use several layers of teflon tape to seal the air leakage. even then you need to keep the connector pipe and the cylinder in a straight line for it to work. frustrating and disappointing.

Works great from a standard Condor HPA tank to a Hill Pump

Not a thing

I have a spin loc tank and for that it would have been easier and cheaper to just go from its quick connector to a male quick connect on the end of the Hill pump whip.

Worked just as they say

Make it so you can use FIP US pipe threads

none

A+++ Not much to say works great!

Nothing..

It works :)

This works like a champ. It is so easy to fill my Talon SS air tank from a scuba tank. Read "Anything else airgunners should know" below for how I did it without having to remove my Marauder connector.

Nothing.

I have a female Foster quick disconnect on my scuba tank for filling a Benjamin Marauder so I had to buy another part to make it work with my Talon SS to use the Foster quick disconnect on both guns. If using a female Foster quick disconnect the Pyramyd Air Quick-Disconnect Male Adapter Item#:PYQuick12FPB[PY-A-596 must also be purchased. It's only $12 and allows easy switchover between guns.